MicroMAS Installation Guide
MicroMAS Recovery
20
Micro MAS Installation Guide 4/07
(Note that the name and password are case-sensitive.)
then click Next.
7.
Adjust appropriate date, time and time zone, then click Next. Set Auto adjust for Daylight
Savings Time if appropriate for this area.
8.
Click Typical settings, then click Next.
9.
Select No and enter WORKGROUP if the MicroMAS is not in any specific domain.
Note
Note contact your network administrator for more information.
10. Click on Finish when done.
The MicroMAS will restart as soon as the Windows Mini-setup is finished.
Step 1C: Activate Microsoft Windows license
1. Plug the LAN cable into the MicroMAS LAN connector. At this time internet access is required,
or you may choose to license the MicroMAS via a telephone conversation.
2.
On the Windows Taskbar, double click on the Activation Key appearing in the System Tray
window.
3.
Select Yes activate over the internet now or Yes I want to telephone a Customer Service
Representative.
4.
Follow the prompts or instructions to activate the license.
Note
At this point the MicroMAS is in the “as shipped” condition. Data file, configuration files
and license files must be restored.
Step 1D: Setup Network Connections
The recovery software will automatically populate the information listed in this step. This information
can be retained or customer specific information can be entered.
1. Log on to the MicroMAS; click on
Valued Customer
and enter
password
as the password.
2.
From the main menu select
Start > Control Panel > Network and Internet Connection
then
click on
Network Connection
.
3.
Right click on the
Local Area Connection for the Intel® PRO/1000 CT Network
, and select
Properties.
4.
Highlight
Internet Protocol (TCP/IP)
and click the
Properties
button.
5.
Select Use the following IP address and enter the following:
a.
IP Address: 192.168.254.252 (static address)
b.
Subnet Mask: 255.255.255.0
c.
Default Gateway: Blank
6.
Click on OK.
END OF RECOVERY PROCEDURE
Post Recovery Procedure
The MicroMAS is now in its as shipped condition. Go to
“MicroMAS Licensing” on page 16
.
To setup the SES and ACD refer to their manuals.
MicroMAS Software Backup
The files on the MicroMAS should be backed up on a regular basis. The backup files can be stored
on a network disk drive or another network device.
