Toshiba MET401 User Manual Download Page 58

Page: 58 / 124

Photos and your gigabeat®

Retrieving photo data from a digital camera

Retrieving photo data from a digital camera

You can connect the gigabeat

directly to a USB mass storage

device, PTP digital camera, etc., and transfer the photo data saved
in the connected device, digital camera, etc., to the gigabeat

Note that the above operation does not guarantee proper data
transfer from all devices.

A USB conversion cable is needed to connect the gigabeat

to a

digital camera. Purchase a USB conversion cable of “A connector
(female) – Mini B connector (male)” type. (Recommended product:
XXXXX)

Connect the digital camera and gigabeat

using a USB

conversion cable (purchased by the user).

(Sample Illustration)

Turn on the gigabeat

, and then turn on the digital camera.

Depending on the digital camera, the camera may power up
automatically when the gigabeat

is turned on.

The confirmation message “Do you want to transfer data to the
gigabeat?” will appear.

Select

Yes

, and press the Enter button.

Photo data, video data and other transferable data currently
saved in the digital camera will be transferred.

A connector

Mini B connector

USB cable that came with

USB conversion cable

(purchased by the user)

the digital camera

Summary of Contents for MET401





























































































































Search results

Summary of Contents for MET401

Reviews:

Related manuals for MET401

Brands by name

Popular brands

Toshiba MET401, User Manual

Search results

Summary of Contents for MET401

Reviews:

Related manuals for MET401

Brands by name

Popular brands