22
Getting Started with Your gigabeat®
Installing the software
❖
If your computer is started or restarted or any of its operation
resumed while the gigabeat
®
is still connected to the
computer, your computer may stop before completing the
startup process or resumption of operation depending on the
specification of your computer. In this case, remove the
gigabeat
®
from your computer and restart the computer.
❖
If your computer has entered and exited the Standby mode or
Sleep mode while gigabeat was still connected, the computer
may no longer communicate with the gigabeat
®
properly. If
this happens, connect your computer and the gigabeat
®
again.
❖
Once you have connected your computer and the gigabeat
®
and the message “The gigabeat
®
is now connected” appears
on the screen, the gigabeat can no longer be operated. If the
gigabeat
®
is connected to your computer while music is
playing, the playback will stop.
❖
Do not use a USB hub to reconnect the gigabeat
®
and your
computer. If you use a USB hub the gigabeat
®
/computer may
not function.
Removing the gigabeat
®
from your computer
After the dots have stopped circling and while the message “The
gigabeat
®
is now connected” is shown on the screen
,
unplug the
USB cable from the gigabeat
®
.
While data is being transmitted between your computer and the
gigabeat
®
, “Updating data” and other messages are shown on the
gigabeat
®
screen. Do not unplug or plug the USB cable while the
screen indicates that processing is still in progress (see the image
NOTE
