Toshiba MET401 User Manual Download Page 17

Page: 17 / 124

Getting Started with Your gigabeat®

Installing the software

Computer system requirements

u need a computer system that meets the hardware and

software requirements listed below

1. The gigabeat

may not operate on all computers. The gigabeat

does not

support Macintosh

systems.

2. To operate the gigabeat

in the USB 2.0 mode, a USB 2.0 interface must

be pre-installed on the computer. The gigabeat

functions as a USB 1.1

device when connected to a USB 1.1 interface.

Installing the software

You need Windows Media

Player 11 or 10 to connect your

gigabeat

to your computer to charge the gigabeat

, transfer music,

or transfer video and image data from your computer to the
gigabeat

If Windows Media

Player 11 is not yet installed on your computer,

please install it from the CD-ROM that came with your gigabeat

Please note that a computer pre-installed with Windows Vista

software includes Windows Media

Player 11.

If your computer is using Windows Media

Player 10, a patch

program must be installed. You need to install Windows Media

Player 10 from the CD-ROM again even if it is already installed.
This way, the necessary correction program will also be installed.

Operating
system

Microsoft

Windows Vista

, XP Home Edition, XP Professional or XP

Media Center Edition (Microsoft

Windows

XP: Service Pack 2 is

recommended.)

CPU

Windows Vista

: 800 MHz or more (1.5 GHz or more is recommended.)

Windows

XP: 300 MHz or more (1.5 GHz or more is recommended.)

RAM

Windows Vista

: 512 MB or more (1 GB or more is recommended.)

Windows

XP: 128 MB or more (512 MB or more is recommended.)

Hard disk
space

200 MB or more

Interface

USB port (USB 2.0/1.1)

CD-ROM
drive

Required for software installation

Software

Windows Media

Player 11 or Windows Media

Player 10

Summary of Contents for MET401





























































































































Search results

Summary of Contents for MET401

Reviews:

Related manuals for MET401

Brands by name

Popular brands

Toshiba MET401, User Manual

Search results

Summary of Contents for MET401

Reviews:

Related manuals for MET401

Brands by name

Popular brands