Toshiba MET401 User Manual Download Page 114

Page: 114 / 124

113

Chapter 8

If you have problems

Error messages

The following error messages may be displayed on the gigabeat

screen. If any of these messages appear, take the applicable action.

If an error occurs, an applicable message will appear as shown
below. If you have encountered any of these messages, reset the
gigabeat

After a reset, the gigabeat

will display the start screen.

If the start screen is not displayed and the error message appears
again, contact the gigabeat

call center at 1-877-250-8595 or

1-949-583-3212 for assistance. Or, you can visit the Web site at

www.gigabeatsupport.toshiba.com

Message

Description and action

The specified item is not
found or cannot be played.

The data you are playing may have been deleted or
damaged. Transfer the data to the gigabeat

again.

The specified item does not
have a valid license.

The license of the data you are playing has expired.
Transfer the data to the gigabeat

again.

The gigabeat

will be

restarted to recover from an
error. All media items will
be deleted.

When the Enter button is pressed, formatting will
start and the gigabeat

will restart. Since the

gigabeat

memory is formatted, all files and recorded

programs you have transferred to the gigabeat

will

be removed.

Summary of Contents for MET401





























































































































Search results

Summary of Contents for MET401

Reviews:

Related manuals for MET401

Brands by name

Popular brands

Toshiba MET401, User Manual

Search results

Summary of Contents for MET401

Reviews:

Related manuals for MET401

Brands by name

Popular brands