Toshiba MA-600 Programming Manual Download Page 169

Page: 169 / 191

6. TERMINAL FILE PROGRAMMING

EO3-11106

6.35 Report Item Print/Non-Print Setting

6-149

3) Example

To set Item Code 3 “NEG GT” with Non-print status.

Operation LCD

Display Remarks

When the ECR is being outside a sale

and in

SET

mode, depress the

[

↓

]

key

five times.

The cursor is moved on to “

6 OTHER

”.

Depress the

[6]

[Enter]

key.

“

6 OTHER

” is selected.

Depress the

[1]

[Enter]

key.

“

1 REPORT PRINT ITEM

” is selected.

Depress the

[

↓

]

key twice.

(Item Code 3 (“NEG GT”) is selected.)

While ? is shown on the upper-right corner
of the LCD display screen, the

[?]

key

depression results in that the following
guidance message appears on the LCD
display.

Select either Print or Non-print status

with the

[

←

]

[

→

]

key.

The status reverses between Y and N with
the

[

←

]

[

→

]

key.

The

[Enter]

key depression results in

that the setting data is entered.

The

[End]

key depression allows the

ECR to end this setting.

A long receipt is issued and the display
returns to Main Menu screen.

TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437

Open 8:00am to 7:00pm
Closed: every Wednesday

31-10-2005 MON #3001

REPORT PRINT
#003 NEG GT 0
#003 NEG GT 1

0032 13:25TM

Summary of Contents for MA-600
































































































































































































Search results

Summary of Contents for MA-600

Reviews:

Related manuals for MA-600

Brands by name

Popular brands

Toshiba MA-600, Programming Manual

Search results

Summary of Contents for MA-600

Reviews:

Related manuals for MA-600

Brands by name

Popular brands