6. TERMINAL FILE PROGRAMMING
EO3-11106
6.8 Store Name Message Programming
6-57
3) Example:
To program the following Store Message.
Operation LCD
Display Remarks
When the ECR is being outside a sale
and in
SET
mode, depress the
[1]
or
[Enter]
key.
Depress the
[
↓
]
key twice.
The cursor is moved on to “
3 STORE
MESSAGE
”.
Depress the
[3]
or
[Enter]
key.
The message already programmed is
displayed.
While ? is shown on the upper-right corner
of the LCD display screen, the
[?]
key
depression results in that the following
guidance message appears on the LCD
display.
The
[Enter]
key depression allows the
ECR to enter the 1st line message
input mode. (The
[C]
key depression
clears the message already
programmed.) The 1st line message is
input.
To program a message in a desired line,
move the cursor there with the
[
↓
]
key then
depress the
[Enter]
key.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
The
[Enter]
key depression results in
that the input message is entered and
displayed.
When the
[Enter]
key is depressed, the
message programmed in the 1st line is
printed.
Example of key operation)
[
→
] [
→
] [
→
] [
→
] [
→
] [
→
][
→
] [Dbl] [T] [E]
[C] [
→
] [S] [T] [O] [R] [E] [Enter]
The
[Enter]
key depression allows the
ECR to enter the 2nd line message
input mode. (The
[C]
key depression
clears the message already
programmed.) The 2nd line message
is input.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
(continued on the next page)
T E C
S T O R E
1 3 4 3 P E A C H D R I V E
P H O N E :
8 7 - 6 4 3 7
Line No. 1
Line No. 2
Line No. 3
Line No. 4
Number of programmed characters
Number of programmable characters