Toshiba MA-600 Programming Manual Download

Page: 155 / 191

6. TERMINAL FILE PROGRAMMING

EO3-11106

6.29 Negative Amount Key Limit Amount Setting

6-135

6.29 Negative Amount Key Limit Amount Setting

The limit amount to be entered through each of the negative-amount keys

[VND CPN]

[STR CPN]

, and

[-]

Are

set here.

Any time outside a sale

Mode

Lock:

SET

1) Menu

Tree

2) Operation

Flowchart

Main Menu

ECR is being outside a sale and in

SET

mode.

Depress

[

↓

]

three times then

[Enter]

Depress

[4]

“

4 RATE, LIMIT AMOUNT

” is selected.

Depress

[

↓

]

three times then

[Enter]

Depress

[4]

“

4 DISC AMT LIMIT

” is selected.

Input the limit amount of the Vender

Coupon Key (

[VND CPN]

), then

depress

[Enter]

0 to 999999 (€0,00 to €9999,99)

Input the limit amount of the Store

Coupon Key (

[STR CPN]

), then

depress

[Enter]

0 to 999999 (€0,00 to €9999,99)

Input the limit amount of the Amount

Discount Key (

[-]

), then depress

[Enter]

0 to 999999 (€0,00 to €9999,99)

[End]

This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.

NOTES:

1. The

[VND CPN]

key will not be restricted by the limit amount set here but the amount up to 7

digits will be entered in

MGR

mode.

2. The limit amount set here cannot be released by the

[LC OPEN]

(or

[OPEN]

) key in transaction

entries.

OPERATION

CONDITION

Summary of Contents for MA-600
































































































































































































Search results

Summary of Contents for MA-600

Reviews:

Related manuals for MA-600

Brands by name

Popular brands

Toshiba MA-600, Programming Manual

Search results

Summary of Contents for MA-600

Reviews:

Related manuals for MA-600

Brands by name

Popular brands