Toshiba MA-600 Programming Manual Download

Page: 188 / 191

6. TERMINAL FILE PROGRAMMING

EO3-11106

6.42 Serial No. Setting

6-168

6.42 Serial No. Setting

A maximum of 8-digit serial No. is set here. The serial No. will be printed on the Daily and GT Financial
Read/Reset Reports.

Any time outside a sale

Mode

Lock:

SET

1) Menu

Tree

2) Operation

Flowchart

Main Menu

ECR is being outside a sale and in

SET

mode.

Depress

[

↓

]

five times then

[Enter]

Depress

[6]

“

6 OTHER

” is selected.

Depress

[

↓

]

eight times then

[Enter]

Depress

[9]

“

9 SERIAL NO.

” is selected.

Input a Serial Number.

Max. 8 digits

[End]

This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.

NOTES:

1. When inputting 0, the serial No. will be reset. (None of serial No. is printed on the reports.)
2. The serial No. is always printed on the reports with an 8-digit value. If the serial No. 1 is set, ”00000001” is

printed on the reports.

OPERATION

CONDITION

Summary of Contents for MA-600
































































































































































































Search results

Summary of Contents for MA-600

Reviews:

Related manuals for MA-600

Brands by name

Popular brands

Toshiba MA-600, Programming Manual

Search results

Summary of Contents for MA-600

Reviews:

Related manuals for MA-600

Brands by name

Popular brands