manualshive.com logo in svg

Toshiba M200 - Portege - Pentium M 1.5 GHz, Maintenance Manual

Share
Download
Toshiba M200 - Portege - Pentium M 1.5 GHz Maintenance Manual Download Page 182

3 

Tests and Diagnostics

 

3.26

  

SETUP

 

3-80 

 

Portege M200 Maintenance Manual (960-457)   

13.

 

Peripheral 

This option set the HDD and other devices. 

(1)

 

Internal Pointing Device 

Use this option to set whether the touch pad is available or not.  

Enabled

   

 

Enables touch pad. (Default) 

Disabled

   

 

Disables touch pad. 

(2)

 

Hard Disk Mode 

Use this item to select the hard disk mode. 

Enhanced IDE (Normal)

  Select this mode when the HDD is used for Windows XP 

Tablet PC Edition. (Default) 

Standard IDE  

 

 

Select this mode when using an OS which does not support 

the Enhanced IDE. When this mode is selected, up to 
528MB is logically available and the rest of the capacity 
is not usable.

 

NOTE

: Formats for Enhanced IDE and Standard IDE are different, so if you 

change the setting, you will have to reformat the hard disk for the appropriate 
setting. 

 

14.

 

Legacy Emulation 

(a)

 

USB KB/Mouse Legacy Emulation 

This option sets the legacy support condition of the USB keyboard and the USB 
mouse. 

Enabled

   

Enables legacy support. (Default) 
USB keyboard and USB mouse are available without the driver.  

Disabled   

Disables legacy support 

Summary of Contents for M200 - Portege - Pentium M 1.5 GHz






































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands