Toshiba M200 - Portege - Pentium M 1.5 GHz, Maintenance Manual

Page: 163 / 325

3.24 Floppy Disk Drive Utilities 3 Tests and Diagnostics
Portege M200 Maintenance Manual (960-457) 3-61
(e) Typing
1
displays the message from step (c) above. Typing
2
returns the test to the
DIAGNOSTIC MENU.
3. COPY program
(a) When FORMAT program is loaded, the following message is displayed:
FLOPPY DISK FORMAT & COPY : V6.00
Type select (0:2DD,3:2HD) ?
(b) Selecting a media/drive type number will display a message below:
Insert source disk into drive A:
Press any key when ready.
(c) Remove the Diagnostics Disk from the FDD, insert the source disk and press any
key. The following message appears and copying of the disk starts.
[ FDD TYPE ] : TRACK = XXX
[ FDD TYPE ] : HEAD = X
[ FDD TYPE ] : SECTOR = XX
Copy start
[[ track,head = XXX X ]]
(d) Remove the source disk from the FDD, insert a formatted work disk and press any
key. The following message will appear and start copying to the target disk.
Insert target disk into drive A:
Press any key when ready.
[[ track,head = XXX X ]]
(e) When the amount of data is too large to be copied in one operation, the message
from step (b) is displayed again. After the floppy disk has been copied, the
following message will appear:
Copy complete
Another copy (1:Yes/2:No) ?
(f) To copy another disk, type
1
and the message from step (a) is displayed again.
Entering 2 returns the test program to the DIAGNOSTIC MENU.