manualshive.com logo in svg

Toshiba M200 - Portege - Pentium M 1.5 GHz, Maintenance Manual

Share
Download
Toshiba M200 - Portege - Pentium M 1.5 GHz Maintenance Manual Download Page 157

3.22

  

Log

 Utilities 

3 

Tests and Diagnostics

 

Portege M200 Maintenance Manual (960-457) 

 

3-55 

3.22  Log Utilities 

3.22.1 

Function Description 

This function logs error information generated while a test is in progress and stores the results in 
RAM. This function can also store data on a floppy disk or output the data to a display or a printer.  

If the power switch is turned off, the error information will be lost. The error information is displayed 
in the following order: 

1.

 

Error count (CNT) 

2.

 

Test name, Subtest number (TS-No) 

3.

 

Pass count (PASS) 

4.

 

Error status code (STS) 

5.

 

FDD/HDD or memory address (ADDR) 

6.

 

Write data (WD) 

7.

 

Read data (RD) 

8.

 

HDC status code (HSTS) 

9.

 

Error status name (ERROR STATUS NAME) 

Summary of Contents for M200 - Portege - Pentium M 1.5 GHz






































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands