manualshive.com logo in svg

Toshiba M200 - Portege - Pentium M 1.5 GHz, Maintenance Manual

Share
Download
Toshiba M200 - Portege - Pentium M 1.5 GHz Maintenance Manual Download Page 176

3 

Tests and Diagnostics

 

3.26

  

SETUP

 

3-74 

 

Portege M200 Maintenance Manual (960-457)   

(2)

 

HDD Password Mode 

This option selects the type of HDD password you want to register. You can select the 
type when any HDD passwords (user HDD password or master HDD password) are 
not set. If any HDD password is set, cancel it and select the type. 

User Only

  

 

Only the user password is registered. (Default) 

User

  

Both the master password and the user password are registered. 

(3)

 

User Password 

Use this option to set the user password. 

(4)

 

Master Password 

This option appears when "HDD Password mode" is set to "User".  

Set the master password first and then set the user password. 

6.

 

Boot Priority 

(a)

 

Boot Priority 

Use this option to set the priority for booting of the computer and the priority for the 
HDD for booting. 

FDD

→

HDD

→

CD-ROM

→

LAN:

  The computer looks for bootable files in the 

following order: FDD (*1), HDD (*2), CD-
ROM (*3) and LAN  

HDD

→

 CD-ROM

→

LAN

→

FDD:

The computer looks for bootable files in the 

following order: HDD, CD-ROM, LAN and 
FDD.

 

FDD

→

 CD-ROM

→

LAN

→

HDD:

  The computer looks for bootable files in the 

following order: FDD, CD-ROM, LAN and 
HDD. 

CD-ROM

→

LAN

→

HDD

→

FDD:

  The computer looks for bootable files in the 

following order: CD-ROM, LAN, HDD and 
FDD. 

CD-ROM

→

LAN

→

FDD

→

HDD:

  The computer looks for bootable files in the 

following order: CD-ROM, LAN, FDD and 
HDD.

 

HDD

→

FDD

→

 CD-ROM

→

LAN:

The computer looks for bootable files in the 

following order: HDD, FDD, CD-ROM and 
LAN. (Default) 

Summary of Contents for M200 - Portege - Pentium M 1.5 GHz






































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands