manualshive.com logo in svg

Toshiba M200 - Portege - Pentium M 1.5 GHz, Maintenance Manual

Share
Download
Toshiba M200 - Portege - Pentium M 1.5 GHz Maintenance Manual Download Page 121

3.7

  Keyboard Test 

3 

Tests and

 Diagnostics 

Portege M200 Maintenance Manual (960-457)   

 

3-21 

The following message will appear. Select a port to be tested and press 

Enter

. 

Test port number select (1:Port0, 2:Port1, 0:Port0&1) ? 

If the test ends successfully, OK is displayed.  If nothing is displayed, there may be 
a problem with the USB port.  Check the wraparound connection and repeat the 
test. 

Subtest 07 

Toshiba scroller test 

This subtest checks functioning of the Toshiba scroller. 

The following messages appear on the display in order. Move the 4D button (cross 
function button) to the indicated direction in the following order. 

KB Test  =  Down     -50 

KB Test  =  Up       -48 

KB Test  =  Left     -4B 

KB Test  =  Right    -4D 

After the following message appears, press the 4D button. 

KB Test  =  Enter    -1C 

After the following message appears, press the ESC (ESC/Rotation) button on the 
right side of the 4D button. 

KB Test  =  ESC    -01 

If the test ends successfully, the display returns to the KEYBOARD TEST menu. 

Subtest 08 

Windows security button test 

This subtest checks functioning of the Windows security button. 

Press the Windows security button after the following message appears. 

Press [ Windows Security ] button 

If the test ends successfully, the display returns to the KEYBOARD TEST menu. 

Summary of Contents for M200 - Portege - Pentium M 1.5 GHz






































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands