26
Notes on batteries
Improper use of batteries may cause battery leakage and corrosion. To operate the remote control correctly,
follow the instructions below.
Do not insert batteries into the remote control in the wrong direction.
Do not charge, heat, open, or short-circuit the batteries. Do not throw batteries into fire.
Batteries contain toxic substances. Do not dispose of them with ordinary trash. Dispose of batteries only
in accordance with local ordinances.
Do not leave dead or exhausted batteries in the remote control.
Do not use different types of batteries together, or mix old and new batteries.
If you do not use the remote control for a long period of time, remove the batteries to avoid possible
damage from battery corrosion.
If the remote control does not function correctly or if the operating range becomes reduced, replace all
batteries with new ones.
If battery leakage occurs, wipe the battery liquid from the battery compartment, then insert new batteries.
Operating with the remote control
30
O
Within about 5m
30
O
1.
Point the remote control at the remote sensor and press
the buttons.
2.
Distance: About 5 m from the front of the remote sensor.
3.
Angle: About 30
°
in each direction of the front of the remote
sensor.
Do not expose the remote sensor of the recorder to a strong light source such as direct sunlight or other
illumination. If you do so, you may not be able to operate the recorder via the remote control.
Do not drop or give the remote control a shock.
Do not leave the remote control near an extremely hot or humid place.
Do not spill water or put anything wet on the remote control.
Do not disassemble the remote control.
Summary of Contents for HDD-J35
