Step
Figure
Discription
Remark
14
Open the Battery Cover. Use
screw A325 and install the Switch
PCB of the TERMINAL PCB
ASSY (UA11).
Check the switch lever moves
when the battery cover that open
and close.
Be careful not to cut FPC.
15
Connect the TERMINAL PCB
ASSY (UA11) of FPC to MAIN
PCB ASSY (U001).
16
Insert the Cradle Terminal of
TERMINAL PCB ASSY (UA11) to
Main Cover ASSY (AA01) and fix
with screws A327*2.
17
It sticks on a TERMINAL PCB
ASSY (UA11) in order of Shield
Gasket B (A356) and Shield
Gasket A (A355).
18
Connect the LENS-MAIN FPC
ASSY (UA09) to Lens Module
ASSY (HA52) and install the Lens
Cushion (A306*4) and Lens
Holder (A305).
The connector of FPC is an upper
point of contact.
19
Tapes are stuck as shown.
Do not stick on the moving part of
connector.
20
The position of a Lens Cushion
(A306) is united and a lens block
is set to Main Cover ASSY
(AA01).
The position of Main Cover ASSY
(AA01) is united with a Lens
Holder (A305). (Two positionings).
Be careful to be unable to touch a
lens side.
When a Lens Cushions (A306)
tends to be omitted, it attaches in
a Main Cover ASSY (AA01) side.
36
Summary of Contents for Gigashot GSC-R30
Page 12: ...2 Mechanical Parts 2 1 Explode Diagram GSC R60 11 ...
Page 13: ...GSC R30 12 ...
Page 58: ...GSC R60 GSC R30 ...