Toshiba Gigashot GSC-R30, Service Manual

Page: 28 / 58

-
-
-
-
-
-
Step Figure Discription Remark
1
Before Disassembly
Check scratches and damage of
the body. Check items
- Any dent of the Top cover ASSY.
- The crevice when closing LCD.
- Transformation of the Zoom
Lever.
- The crack of a lens ring.
- The crack of an LED cover.
Etc.
2
Remove the SD card and Battery. Remove the battery from the
bottom. Remove the SD card from
the back of camera.
3
Open the terminal cover.
Remove the screws A328 and
A332.
4
Remove the screws A328*2 and
A326 to take off the Left Cover
ASSY (AA02). Lug is in the LCD side , it raises
and shifting the back side.
5
Remove the HDD Cover ASSY
(AC40).
It is backing up before decomposition work, when there is a request of a purport needed without erasing
the picture in HDD from a user in case HDD's is exchanged.
When you cannot perform reading of data, utilize commercial file restoration software.
Check the repaired camera arrives to a user, before deleting the backup data immediately.
5-1. Disassembly
5. Disassembly/Assembly
Do not formatting the hard disk drive carelessly. Do not deleting the Image and other file in hard disk
This camera has its own built-in hard disk drive. Since a user's personal information may be included in it,
be careful of the handling of a file, and prevent the outflow of data etc.
A user's consent is required when exchanging the hard disk drive. Please ask to user about exchanging
the hard disk drive agree or not.
A user's consent is required when exchanging the hard disk drive. Please ask to user about deleting data
agree or not.
27