Toshiba Gigashot GSC-R30, Service Manual

Page: 42 / 58

6. Adjustment
6-1. Items to adjust
The table 6.1.1 shows the adjustment required when parts are replaced. The items with ○ are the subjects to
adjust.
Table 6.1.1
Parts name (parts number)
Item to adjust
Lens Module ASSY
(HA52)
MAIN PCB ASSY
(U001)
HDD ASSY
(HA5A)
CCD2CH adjustment
(CCD2CH)
○ ○ -
CCD sensitivity
(SENSITIVE)
○ ○ -
IRIS/ND ○ ○ -
Shutter ○ ○ -
CCD defect pixel ○ ○ -
White balance ○ ○ -
Zoom/focus ○ ○ -
HDD format - - ○
Firmware update ○ ○ ○
Factory setting ○ ○ ○
Notes:
1) Only required items should be adjusted. The adjustment should be performed sequentially from the top of
the table. The proper adjustment results may not be given unless specified order is followed.
2) Update the firmware only when the versions is different.
3) All items will be reset to the default values when the factory setting is applied.
4) The contents of HDD will not be erased by the adjustment.
6-2. Devise to Use
- Standard light source
Model name: LSB-6M/10
Manufacturer: Tsubosaka Electric Co., Ltd.
For CCD2CH adjustment and white balance purpose.
- Collimator
Model name: VC-1100
Manufacturer: Kyoritsu Electric Co., Ltd.
For zooming/focus adjustment purpose.
- Power supply (AC adapter, accessories)
- Lens hood
Model name: MEHLH1 (attached to MEHV10)
- SD card
Capacity: 8MB or greater
- Adjustment firmware *
File name: ADJR20.bin (provided by Toshiba)
- Firmware for update *
File name: GSCR20.bin and UP_R20.bin (provided by Toshiba)
41