background image

English  

-1-

 

WEEE Warning Message 

Symbol for Separate Collection in European Countries 

This symbol indicates that this product is to be collected 

separately. 

The following apply only to users in European countries: 

z

  This product is designated for separate collection at an 

appropriate collection point. Do not dispose of as 

household waste. 

z

  For more information, contact the retailer or the local 

authorities in charge of waste management. 

FCC STATEMENT 

This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: 

(1). 

This device may not cause harmful interference, and 

(2). 

This device must accept any interference received, including interference that 
may cause undesired operation. 

Note: 

This equipment has been tested and found to comply with the limits for Class B digital 
devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. 
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following 
measures: 

„

 Reorient 

or 

relocate the receiving antenna 

„

  Increase the separation between the equipment and receiver 

„

  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected 

 

Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 

of the FCC rules. Do not make any changes or modifications to the equipment unless 

otherwise specified in the manual. If such changes or modifications should be made, 

 

Summary of Contents for DV1112


































































Reviews: