English
-11-
Getting Up and Running
Loading the Battery
Before using the camera, you must load the NP 60
battery.
Follow the arrow direction and slide to eject the
battery cover.
Insert the battery according to the correct polarity
marks (+ or -)
Close the battery cover firmly.
Inserting and Removing an SD Card
The camera comes with internal memory which allows you to store pictures, movies,
voice recordings and music. You can expand the memory capacity by using an
optional SD or MMC memory card up to 2GB. To insert a memory card, refer to the
image above:
Insert the memory card into the right position.
To remove an installed SD card, press the card inwards to release it.
When the card pops out, gently remove it from its slot.
NOTE
z
When a memory card is fitted, movies and pictures are saved on card rather than on the
built-in memory.
Protecting Data on an SD Card
SD card is read-only by locking the SD card. No pictures, movies and voice can be
recorded when the SD card is locked. Make sure the lock is on writeable position
before recording any media.
Writeable position
Write-Protected
Position
Writeable position
Write-Protected
Position