Toshiba GD-1151 Operator'S Manual Download Page 120

Page: 120 / 190

118

5.ADVANCED FUNCTIONS

10.Save as File (Cont.)

Press the [FILE NAME] button to enter the file name (maximum 45 let-
ters) of the original to be saved, and then press the [ENTER] button.

• To enter letters, see the Operator's Manual for Basic Function.

Select the location where the data is saved.

• [MFP LOCAL]: Select it when the data should be saved in the hard disk of this equipment. The data will be

saved under the directory path shown on the menu.

• [REMOTE 1] and [REMOTE 2]: Select them when the data should be saved in the hard disk of a client PC

through a server. The administrator has to make some settings in advance using the TopAccess function to
select either of them. See the TopAccess Guide for details.

Summary of Contents for GD-1151































































































































































































Search results

Summary of Contents for GD-1151

Reviews:

Related manuals for GD-1151

Brands by name

Popular brands

Toshiba GD-1151, Operator'S Manual

Search results

Summary of Contents for GD-1151

Reviews:

Related manuals for GD-1151

Brands by name

Popular brands