Toshiba GD-1151 Operator'S Manual Download Page 90

Page: 90 / 190

5.ADVANCED FUNCTIONS

4.Mailbox Communication (Cont.)

Press the [BOX NUMBER] button to enter the next menu, key in the
box number(s) (maximum 20 digits), and then press the [ENTER] but-
ton.

• If you want to set up a password, press the [PASSWORD] button to enter the next menu, key in the password

(maximum 20 digits) and then press the [ENTER] button.

• The password being entered is indicated with "*".

• A password is required to Transmit to a Bulletin Board Mailbox from a remote fax.
• A password is required to Poll a Confidential Mailbox from a remote fax.

Confirm that the registered information is correct, and then press the
[ENTER] button.

• If the entered box number has already been registered, "Already assigned" appears.

Press the [BOX NUMBER] button to enter the next menu, press the [Back Space] button to delete this box
number and key in a new box number.

The registered mailboxes can be confirmed in a mailbox list. (

P.125 “Printing ITU mailbox list”)

Summary of Contents for GD-1151































































































































































































Search results

Summary of Contents for GD-1151

Reviews:

Related manuals for GD-1151

Brands by name

Popular brands

Toshiba GD-1151, Operator'S Manual

Search results

Summary of Contents for GD-1151

Reviews:

Related manuals for GD-1151

Brands by name

Popular brands