Toshiba GD-1151 Operator'S Manual Download Page 29

Page: 29 / 190

Precautions for using the Reversing Automatic Document Feeder

Do not use the following 1 to 8 type originals as they may misfeed or become damaged:

Also, the following 9 to 10 type originals should be handled carefully:

Badly wrinkled or folded originals; in particular, originals whose leading edge is curled may fail to be
correctly fed.

Originals with carbon paper

Taped, pasted or clipped (cut out) originals

Clipped or stapled originals

Originals with holes or tears

Damp originals

OHP film originals

Others: tracing paper, permeable paper, coating paper (coating with wax, etc.)

Multiple originals, when pinched between 2 fingers, cannot be moved, or originals which are sur-
face treated may fail to be separate properly.

10: Folded or curled originals should be smoothed out before being used.

Summary of Contents for GD-1151































































































































































































Search results

Summary of Contents for GD-1151

Reviews:

Related manuals for GD-1151

Brands by name

Popular brands

Toshiba GD-1151, Operator'S Manual

Search results

Summary of Contents for GD-1151

Reviews:

Related manuals for GD-1151

Brands by name

Popular brands