Toshiba GD-1151 Operator'S Manual Download Page 102

Page: 102 / 190

100

5.ADVANCED FUNCTIONS

4.Mailbox Communication (Cont.)

Press the [CONFIDENTIAL] (or [BULLETIN BD.]) button, and then
press the [INPUT] button.

Press the [ENTER] button.

• If the selected mailbox has not been set, "No entry" appears.

Press the [BOX NUMBER] button to enter the next menu, key in the
box number(s) (maximum 20 digits), and then press the [ENTER] but-
ton.

• If a password has been set, press the [PASSWORD] button to enter the next menu, key in the password (max-

imum 20 digits) and then press the [ENTER] button.

Press the [ENTER] button.

• If the box number keyed in is not correct, "No entry" appears. If the password keyed in is not correct, "Invalid

number" appears. Key in the correct box number or password.

Press the [START] button.

• The original data is registered in the mailbox as it is scanned to memory.
• When you cancel the registration, press the [STOP] button and then press the [JOB CANCEL] button.

Summary of Contents for GD-1151































































































































































































Search results

Summary of Contents for GD-1151

Reviews:

Related manuals for GD-1151

Brands by name

Popular brands

Toshiba GD-1151, Operator'S Manual

Search results

Summary of Contents for GD-1151

Reviews:

Related manuals for GD-1151

Brands by name

Popular brands