Toshiba GD-1151 Operator'S Manual Download Page 164

Page: 164 / 190

162

7.REGISTERING AND SETTING ITEMS

4.2nd Line Board (optional) Installation (Cont.)

2nd line setting

When the optional 2nd line board is installed, its operation can be selected using the following procedure:
•

Transmission/Reception
Both transmission and reception are available all the time.

•

Reception only (24 hours)
The 2nd line is always standing by for reception.

•

Reception only (timer)
Only reception is available during the specified period of time.

Even during reception only, the specified line performs transmission if any line has been specified by
the options or address menu.

Press the [USER FUNCTIONS] button on the control panel.

Press the [ADMIN] button and then the [PASSWORD] button.

Enter the administrator password (6 to 10 digits), and then press the
[ENTER] button.

• Ask your administrator for the administrator password.

Summary of Contents for GD-1151































































































































































































Search results

Summary of Contents for GD-1151

Reviews:

Related manuals for GD-1151

Brands by name

Popular brands

Toshiba GD-1151, Operator'S Manual

Search results

Summary of Contents for GD-1151

Reviews:

Related manuals for GD-1151

Brands by name

Popular brands