Toshiba GD-1151 Operator'S Manual Download Page 107

Page: 107 / 190

105

Press the [BOX NUMBER] button to enter the next menu, key in the
box number(s) (maximum 20 digits), and then press the [ENTER] but-
ton.

• If a password has been set, press the [PASSWORD] button to enter the next menu, key in the password (max-

imum 20 digits) and then press the [ENTER] button.

A password entry is necessary for the data polling out of a confidential mailbox.

Press the [ENTER] button.

Specify the remote Fax

• Entering the Fax number (

P.37 “Direct entry with digital keys”)

• Selecting from address book (

P.38 “Address book entry”)

• Selecting by group registration (

P.39 “Group entry”)

• Selecting using multi-address transmission (

P.47 “Multi-address transmission”)

Press the [START] button.

• The data is polled (retrieved) out of the mailbox and received as a Fax.

• The registered box number is transmitted as an SEP address.
• The registered password is transmitted as a PWD.

Summary of Contents for GD-1151































































































































































































Search results

Summary of Contents for GD-1151

Reviews:

Related manuals for GD-1151

Brands by name

Popular brands

Toshiba GD-1151, Operator'S Manual

Search results

Summary of Contents for GD-1151

Reviews:

Related manuals for GD-1151

Brands by name

Popular brands