Toshiba GA-1190 Setup Manual Download

Page: 81 / 156

Viewing Counters 79

Displaying the department counter

In the Department menu page, you can display the counter information of a specific department.
If you want to display the department counter, you must enter the department code.

Displaying the department counter is available only when a department code is set by using this
equipment.

The administrator can view all departments including respective counter information.

P.138 “Managing Department Codes (For Administrators)”

Click the Counters tab and the Department menu.

The Department menu page is displayed.

Enter a department code that you want to display the counter in the
“Department Code” field and click [Enter].

The department counter for specified department is displayed.

Summary of Contents for GA-1190





























































































































































Search results

Summary of Contents for GA-1190

Reviews:

Related manuals for GA-1190

Brands by name

Popular brands

Toshiba GA-1190, Setup Manual

Search results

Summary of Contents for GA-1190

Reviews:

Related manuals for GA-1190

Brands by name

Popular brands