Toshiba GA-1190, Setup Manual

Page: 44 / 156

5 CONFIGURING NETWORKS (EQUIPMENT)
42 AppleTalk Configuration
AppleTalk Configuration
AppleTalk protocol must be enabled when AppleTalk printing from Macintosh computers needs
to be enabled.
Set the device name of this equipment and AppleTalk zone using TopAccess as required.
See the following page:
P.89 “Setting up the AppleTalk”
1
Press the [USER FUNCTIONS]
button when the ready screen
is displayed.
The “user functions mode” main screen
appears.
2
Press or to select INI-
TIAL SETUP, and then press
the [ENTER] button.
3
Press or to select NET-
WORK, and then press the
[ENTER] button.
4
Press or to select
APPLETALK, and then press
the [ENTER] button.
5
Press or to select
APPLETALK, and then press
the [ENTER] button.
6
Press or to select
ENABLE for enabling Apple-
Talk, or select DISABLE for
disabling it. Then press the
ENTER button.
The screen returns to the one shown in
step 5.
USER FUNCTIONS 00001216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
INITIAL SETUP
03.DRAWER SET POP-UP
04.TERMINAL ID
05.NETWORK
NETWORK
04.IPX/SPX
05.APPLE TALK
06.HTTP
APPLE TALK
01.APPLE TALK
APPLE TALK
1.ENABLE
2.DISABLE