Toshiba GA-1190 Setup Manual Download

Page: 76 / 156

8 TopAccess REGISTRATION TAB PAGE

74 Managing Mailboxes

Deleting an Open Mailbox

You can delete an existing Open Mailbox from TopAccess.

If you want to delete an Open Mailbox, the document must first be retrieved, printed, or canceled
from the Open Mailbox.

Click the Registration tab and the MailBoxes menu.

The MailBoxes menu page is displayed.

Click the box number link that you want to delete in the mailboxes
list.

If you click the box number link that is not protected by a password, skip to step 4.

If you click the box number link that is protected by a password, go to the next step.

Enter the password for the mailbox and click [OK].

The MailBoxes Properties page is displayed.

Click [Delete].

The confirmation dialog box appears.

Summary of Contents for GA-1190





























































































































































Search results

Summary of Contents for GA-1190

Reviews:

Related manuals for GA-1190

Brands by name

Popular brands

Toshiba GA-1190, Setup Manual

Search results

Summary of Contents for GA-1190

Reviews:

Related manuals for GA-1190

Brands by name

Popular brands