Toshiba GA-1190 Setup Manual Download

Page: 140 / 156

12 MANAGING DEPARTMENT CODES ON TopAccess

(FOR ADMINISTRATORS)

138 Managing Department Codes (For Administrators)

Managing Department Codes (For Administrators)

On the Department menu page at the Counter tab, by entering the master code, the administra-
tor can display the department list that contains the counter information for each department.

Displaying the department counter is available only when a department code is set by using this
equipment.

To register or delete the department codes, use the control panel of this equipment. For depart-
ment code settings in this equipment, see

Operator’s Manual for Copying Functions

Click the Counters tab and the Department menu.

The Department menu page is displayed.

Enter the master code in the “Department Code” field and click
[Enter].

The Department Management page is displayed.

The departments list containing the counter information is dis-
played.

You can display the desired department code information by entering that code.

Summary of Contents for GA-1190





























































































































































Search results

Summary of Contents for GA-1190

Reviews:

Related manuals for GA-1190

Brands by name

Popular brands

Toshiba GA-1190, Setup Manual

Search results

Summary of Contents for GA-1190

Reviews:

Related manuals for GA-1190

Brands by name

Popular brands