Toshiba G3 Plus Pack Instruction Manual Download Page 3

Page: 3 / 80

Unified Controller nv series G3 I/O Adapter GA932 Module Instruction Manual

Safety Precautions

On the product and this instruction manual, important information for safe and correct use to
prevent danger to the user and other people as well as property damage is described.

Understand the following information (signs and symbols) before reading the text, and follow
the described items.

Description of signs

Sign

Description

DANGER

Indicates that failure to avoid it will result in an immediate risk of
death or serious injury

(*1)

WARNING

Indicates that failure to avoid it will result in a risk of death or serious
injury

(*1)

CAUTION

Indicates that failure to avoid it will result in a risk of light or medium
injury

(*2)

or only property damage

(*3)

*1: A serious injury indicates loss of sight, injury, burns (high/low temperature), electric shock,

broken bones, or intoxication that will have aftereffects and require hospitalization or long-term

hospital visits for healing.

*2: An injury indicates an injury, burn, or electric shock that does not need hospitalization or

long-term hospital visits for healing.

*3: Property damage indicates consequential damage in terms of breakage of properties or materials.

Description of symbols

Symbol

Meaning

Prohibited

Indicates “Prohibition” or “You must not do”.

Specific details are indicated near the symbol

with pictures and text.

Mandatory

Indicates “Mandatory Action” or “Do as indicated”.

Specific details are indicated near the symbol with pictures and text.

Warning

Indicates Warning.

Specific details are indicated near the symbol

with pictures and text.

(Note) Descriptions of Prohibition, Mandatory Action, and Warning vary depending on the display on

the main unit.

Summary of Contents for G3 Plus Pack

















































































Search results

Summary of Contents for G3 Plus Pack

Reviews:

Brands by name

Popular brands

Toshiba G3 Plus Pack, Instruction Manual

Search results

Summary of Contents for G3 Plus Pack

Reviews:

Brands by name

Popular brands