Toshiba e-STUDIO557 Copying Manual Download Page 122

Page: 122 / 180

4 EDITING FUNCTIONS

120 Outside Erase

3) Press [OK].

Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on
it with force.

Breaking the glass could injure you.

Select other copy modes as required, and then press the [START] button on the control
panel.

Place the original on the original glass.

When placing the original, be sure that the RADF is fully
raised. If not, this function may not properly be able to
detect the border between the original and areas not
belonging to it.

Do not directly look at the original glass during copying
since an intense light may leak.

Summary of Contents for e-STUDIO557




















































































































































































Search results

Summary of Contents for e-STUDIO557

Reviews:

Related manuals for e-STUDIO557

Brands by name

Popular brands

Toshiba e-STUDIO557, Copying Manual

Search results

Summary of Contents for e-STUDIO557

Reviews:

Related manuals for e-STUDIO557

Brands by name

Popular brands