Toshiba e-STUDIO557 Copying Manual Download Page 129

Page: 129 / 180

4.EDITING FUNCTIONS

Tab Paper 127

4 EDITING FUNCTIONS

Select other copy modes as required, and then press the [START] button on the control
panel.

COPIED TAB INSERT

Tab paper is inserted at the specified pages and copying is performed also on the Tab paper.

Set the tab width and shift width using [TAB EXTENSION] in advance.

Prepare the original to copy on the tab paper.

P.121 “Preparing an original to copy on the tab paper”

Place tab paper.

P.121 “Setting tab paper”

Place the original(s).

Insert the original for the tab paper prepared in step 1 at the desired page of the other originals and
place them.

Press [TAB PAPER] on the EDIT menu.

Press [COPIED TAB INSERT].

Summary of Contents for e-STUDIO557




















































































































































































Search results

Summary of Contents for e-STUDIO557

Reviews:

Brands by name

Popular brands

Toshiba e-STUDIO557, Copying Manual

Search results

Summary of Contents for e-STUDIO557

Reviews:

Brands by name

Popular brands