Toshiba e-STUDIO557 Copying Manual Download Page 103

Page: 103 / 180

4.EDITING FUNCTIONS

Image Editing 101

4 EDITING FUNCTIONS

Key in the read values.

1) Press [X1], [X2], [Y1] and [Y2], and then key in the read values correspondingly.
2) You can specify up to 4 areas on 1 page. When you want to specify more than one area, press

[AREA 1] to [AREA 4] to switch the area, and then key in the values correspondingly.

3) Press [OK] after you have specified all the areas.

Select other copy modes as required, and then press the [START] button on the control
panel.

Mirror image / Negative/Positive reversal

You can reverse a page like a mirror (mirror image), or you can reverse the black-and-white of a page
(negative/positive reversal).

Place paper in the drawer(s).

When using bypass copying, be sure to set the paper size.

Place the original(s).

Press [EDITING] on the EDIT menu.

Place the original again on the original glass with its
face down.

Place it with its bottom toward you. Align its top left corner
against that of the original glass.

Mirror image

Negative/Positive reversal

Summary of Contents for e-STUDIO557




















































































































































































Search results

Summary of Contents for e-STUDIO557

Reviews:

Brands by name

Popular brands

Toshiba e-STUDIO557, Copying Manual

Search results

Summary of Contents for e-STUDIO557

Reviews:

Brands by name

Popular brands