Toshiba e-STUDIO557, Copying Manual

Page: 26 / 180

2 HOW TO MAKE COPIES
24 Placing Originals
Placing Originals
„
Acceptable originals
When the RADF (Reversing Automatic Document Feeder) is used, 2-sided originals can be automatically
scanned one sheet after another. When the original glass is used, originals such as OHP films, tracing paper,
booklet or 3-dimensional objects, that cannot be placed on the RADF can be scanned, as well as plain paper.
*1 You may not obtain enough image quality when an original with a paper weight of more than 157 g/m
2
(41.8 lb.) is used.
y Automatic size detection does not work properly when A/B format originals are used in equipment for
North America. It does not work properly when LT format originals are used in equipment other than
that for North America.
y Automatic size detection does not work properly when K format paper is used for printing. (K format is a
standard paper size in China.)
y Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with
force.
y Be sure to place ST-size or A5-size originals in a landscape direction when using the RADF.
y A maximum of 2000 sheets can be scanned per 1 copy job or up until the embedded memory becomes
full.
„
Forgery prevention function
This equipment has a forgery prevention function. Therefore, scan or copy function might not operate
correctly.
Location Maximum size Paper weight
Acceptable sizes for
automatic size detection
Original glass
Length: 297 mm
(11.69")
Width: 432 mm
(17.01")
—
Other than North America:
A3, A4, A4-R, A5-R, B4, B5,
B5-R
North America: LD, LG, LT,
LT-R, ST-R
RADF
1-sided originals: 35 -
209 g/m
2
(9.3 - 110 lb.)
*1
2-sided originals: 50 -
157 g/m
2
(13.3 - 41.8 lb.)
Other than North America:
A3, A4, A4-R, A5-R, B4, B5,
B5-R, FOLIO
North America: LD, LG, LT,
LT-R, ST-R, COMP