Toshiba e-studio4520C Management Manual Download Page 171

Page: 171 / 206

3.MANAGING COUNTERS (COUNTER MENU)

Managing Department Code 169

3 MANAGING COUNTERS (COUNTER MENU)

Deleting the department code

The function allows you to delete the existing department code.

In the DEPT. MANAGEMENT menu, press [DEPARTMENT REGISTRATION].

The DEPARTMENT CODE screen is displayed.

For instructions on how to display the screen above, see the following page:

P.158 “Logging on as administrator”

Press the department button that you want to delete and press [DELETE].

The delete confirmation screen is displayed.

If the touch panel does not display the department code that you want to delete, press

to display the next

screen.

Press [YES] to delete the department code.

Press [NO] to cancel the deletion.

Summary of Contents for e-studio4520C















































































































































































































Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands

Toshiba e-studio4520C, Management Manual

Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands