Toshiba e-studio4520C Management Manual Download Page 150

Page: 150 / 206

2 SETTING ITEMS (ADMIN)

148 IEEE 802.1X Authentication Setting

Confirm the settings and press [APPLY NOW].

The “NETWORK INITIALIZING” message is displayed and this equipment starts initializing the network interface
card to apply the changes.

Error messages

The following error messages may be displayed on the touch panel.

Message

Cause

[802.1X] Auth Server/Switch couldn’t be contacted

The RADIUS server service is stopped.

Configuration for the RADIUS server is not correct.

IEEE 802.1X switch has problem.

[802.1X] Authentication failed

The username or password that user entered is not correct.

[802.1X] Falling back to non-802.1X mode

Network communication is begun using the fall back function,
ignoring IEEE 802.1X authentication.

Summary of Contents for e-studio4520C















































































































































































































Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands

Toshiba e-studio4520C, Management Manual

Search results

Summary of Contents for e-studio4520C

Reviews:

Related manuals for e-studio4520C

Brands by name

Popular brands