Toshiba e-studio281c, Service Manual, Page: 261 / 414

11
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
DRUM RELATED SECTION
11 - 15
[D] Main charger unit
(7) Take off the drum.
Notes:
1. Be sure not to touch, spit or scratch on
the drum surface.
2. Avoid a direct sunlight onto the drum.
Move it to a dark place as soon as it is
taken off.
3. Be sure not to touch the drum thermistor.
4. Be sure not to touch or scratch the edge
of the cleaning blade.
Fig. 11-21
(1) Take off the process unit
( P.11-10 "[B] Process unit").
(2) Rotate the gear counterclockwise for 1 round
or more.
(3) Release 2 latches and take off the main
charger unit.
Note:
Be sure not to touch or damage the drum
surface.
Fig. 11-22
Note:
When the main charger unit is being
installed, rotate the gear counterclockwise
for 1 round or more and install it while the
holder arm is being pulled completely inside.
Fig. 11-23
Drum
1
2
2
Main charger unit
Gear
Gear
Holder arm