Toshiba e-studio281c, Service Manual, Page: 234 / 414

e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
PAPER FEEDING SYSTEM
10 - 20
[B-3] Paper stock sensor (S31/S32)
[B-4] Separation roller
(1) Take off the drawer feeding unit ( P.10-19
"[B-1] Drawer feeding unit").
(2) Pull up the paper stock sensor arm.
(3) Disconnect the connector and release the
latch to take off the paper stock sensor.
Fig. 10-38
(1) Take off the drawer feeding unit ( P.10-19
"[B-1] Drawer feeding unit").
(2) Remove 1 screw and take off the separation
roller holder.
Fig. 10-39
(3) Detach the lever from the holder and take off
the separation roller with the shaft.
Fig. 10-40
Paper stock sensor
Sensor arm
Separation roller holder
Lever
Holder
Separation roller