Toshiba e-STUDIO2500c Operator'S Manual Download Page 40

Page: 40 / 414

1 BEFORE USING EQUIPMENT

38 Description of Each Component

Bluetooth Module (GN-2010)

This module enables the Bluetooth printing.

Installed inside of the equipment

The Antenna (GN-3010) is necessary.

Antenna (GN-3010)

This is used when the Wireless LAN Module and Bluetooth Module are installed.

When the Wireless LAN module (GN-1041) is installed, it is placed on the back right side of
the equipment.

When the Bluetooth Module (GN-2010) is installed, it is placed on the back left side of the
equipment.

e-BRIDGE ID Gate (KP-2004, KP-2005)

Users can login and use the equipment simply by holding their IC card over the e-BRIDGE ID
Gate.

Installed on the right-hand side of the equipment.

This cannot be installed with the Work Table at the same time.

Summary of Contents for e-STUDIO2500c































































































































































































































































































































































































































Search results

Summary of Contents for e-STUDIO2500c

Reviews:

Toshiba e-STUDIO2500c, Operator'S Manual, Page: 40 / 414

Search results

Summary of Contents for e-STUDIO2500c

Reviews: