manualshive.com logo in svg

Toshiba e-STUDIO2500c, Operator'S Manual, Page: 315 / 414

Share
Download
Toshiba e-STUDIO2500c Operator'S Manual Download Page 315

Error Code    313

2D63

Specified network path 
is invalid. Check desti-
nation path.

Make sure you specify correct network folder and retry the scan.

2D64

Logon to file server 
failed. Check user-
name and password.

Make sure you specify correct user name and password to 
logon the file server and retry the scan.

2D65

There are too many 
documents in the 
folder. Failed in creat-
ing new document.

Delete the data in the local storage folder in the equipment and 
retry the scan.

2D66

Failed to process your 
job. Insufficient stor-
age space.

Delete the data in the local storage folder in the equipment and 
retry the scan.

2D67

FTP service is not 
available.

Ask your administrator whether the FTP service is configured 
correctly.

2D68

File sharing service is 
not available.

Ask your administrator whether the SMB protocol is enabled.

2DA8

The HDD is running 
out of capacity for the 
shared folder.

Delete the unnecessary data in HDD.

2DC0

Job cancelled.

Job was cancelled.

2DC1

Power failure 
occurred.

Make sure that the power cable is connected properly and it is 
inserted securely. Resend the job.

Store to e-Filing

2B10

There was no applica-
ble job.

Turn the power OFF and then back ON. Retry the scan. If the 
error still occurs, contact your service representative.

2B11

Job status failed.

Turn the power OFF and then back ON. Retry the scan. If the 
error still occurs, contact your service representative.

2B20

Failed to access file

Turn the power OFF and then back ON. Retry the scan. If the 
error still occurs, contact your service representative.

2B21

Message size 
exceeded limit or 
maximum size

Fragment the message into several smaller-sized ones and 
send them again.

2B30

Insufficient disc space

Delete unnecessary documents in e-Filing and try again.

2B31

Failed to access e-Fil-
ing

Make sure that the specified e-Filing or folder exists. (If not, this 
error would not occur.). Turn the power OFF and then back ON. 
Delete the specified e-Filing or folder and reset them. Retry the 
job in error. If the specified e-Filing or folder cannot be deleted, 
contact your service representative.

2B32

Failed to print e-Filing 
document

Make sure that the specified document exists. (If not, this error 
would not occur.).Turn the power OFF and then back ON. 
Delete the specified document. If the specified document cannot 
be deleted, contact your service representative.

2B50

Failed to process 
image

Turn the power OFF and then back ON. Retry the scan. If the 
error still occurs, contact your service representative.

2B51

Failed to process print 
image

Make sure that the Function List can be printed out. Retry the 
print. If the error still occurs, contact your service representative.

2B90

Insufficient memory

Turn the power OFF and then back ON. Retry the scan. If the 
error still occurs, contact your service representative.

Error code

Problem

What to do

Summary of Contents for e-STUDIO2500c































































































































































































































































































































































































































Reviews:

No comments