Toshiba e-STUDIO2500c Operator'S Manual Download Page 262

Page: 262 / 414

7 TEMPLATE

260 Changing Data of User Groups and Templates

Key in the password (5 digits) for the selected template, and then
press the [ENTER] button.

If no password was set when the template was registered, skip to step 7.

Press the [NAME1] button and the [NAME2] button, and then enter
the new name of the template.

When the [NAME 1] or [NAME 2] button is pressed, the letter entry menu (

P.46) is

displayed. Up to 11 letters can be entered.

The following symbols cannot be used for [NAME 1] and [NAME 2].
["], [=], [|], [*], [<], [>], [?], [+], [[], []], [;], [:], [/], [\], [,], [.]

Summary of Contents for e-STUDIO2500c































































































































































































































































































































































































































Search results

Summary of Contents for e-STUDIO2500c

Reviews:

Toshiba e-STUDIO2500c, Operator'S Manual, Page: 262 / 414

Search results

Summary of Contents for e-STUDIO2500c

Reviews: