Toshiba e-STUDIO2500c Operator'S Manual Download Page 334

Page: 334 / 414

9 BLINKING GRAPHIC SYMBOLS

332 Jam Symbols

Misfeed in the automatic duplexing unit

Be careful not to let your fingers be caught between the equipment and the automatic
duplexing unit. This could injure you.

Do not touch the metal portion of a guide plate as it could burn you.

Lower the paper guide and return the automatic duplexing unit to
the original position.

Be sure to close both sides of the automatic duplexing unit firmly.

Misfeed in the jam releasing cover

Open the automatic duplexing
unit.

Lift the paper guide as indi-
cated by the arrow and remove
any misfed paper.

Open the automatic duplexing
unit.

Summary of Contents for e-STUDIO2500c































































































































































































































































































































































































































Search results

Summary of Contents for e-STUDIO2500c

Reviews:

Toshiba e-STUDIO2500c, Operator'S Manual, Page: 334 / 414

Search results

Summary of Contents for e-STUDIO2500c

Reviews: