Toshiba e-STUDIO2500c Operator'S Manual Download Page 156

Page: 156 / 414

4 IMAGE ADJUSTMENT

154 Twin Colour (2-Colour) Copy

Twin Colour (2-Colour) Copy

This function allows you to copy a coloured original in 2 specified colours. There are 2 types of
twin colour copy as follows:

TWIN COLOUR SELECTABLE:

The black part and the parts other than black in the original are

copied separately in 2 colours which have been manually specified.

RED & BLACK:

The red part in the original is copied in red and the parts other than red are cop-

ied in black and white.

The colour may not be correctly reproduced depending on originals. In that case, copy them in
the full colour mode.

TWIN COLOUR SELECTABLE

Place paper in the drawer(s).

Place the original(s).

Press the [IMAGE] button to enter the image menu, and then press
the [TWIN COLOUR COPY] button.

Press the [TWIN COLOUR SELECTABLE] button.

Summary of Contents for e-STUDIO2500c































































































































































































































































































































































































































Search results

Summary of Contents for e-STUDIO2500c

Reviews:

Toshiba e-STUDIO2500c, Operator'S Manual, Page: 156 / 414

Search results

Summary of Contents for e-STUDIO2500c

Reviews: