manualshive.com logo in svg

Toshiba e-STUDIO2500c, Operator'S Manual, Page: 324 / 414

Share
Download
Toshiba e-STUDIO2500c Operator'S Manual Download Page 324

9 BLINKING GRAPHIC SYMBOLS

322    Replace Toner Cartridge Symbol

Replacing the toner cartridge

When you want to replace a cartridge before the Replace toner cartridge symbol blinks, see the 
User Functions Guide.

1

Open the front cover.

2

Put your fingers in the groove 
and slowly pull out the colour 
toner cartridge to be replaced.

3

When the cartridge is pulled 
out more than halfway, pull it 
straight out while supporting 
it.

Never attempt to incinerate toner cartridges. Dispose of used toner cartridges and toner bags 
in accordance with local regulations. 

Summary of Contents for e-STUDIO2500c































































































































































































































































































































































































































Reviews:

No comments