Toshiba e-studio2007 User Manual Download Page 38

Page: 38 / 170

2 COPY FUNCTIONS

36 Basic Copy Procedure



Placing originals on the Reversing Automatic Document Feeder

1) Align all the originals.
2) Place them face up and align the side guides to the original length.



The top sheet of the originals will be scanned first.



Do not load more than 50 originals (80 g/m

, 20 lb. Bond) at once, and make sure the thickness of the stack

of originals does not exceed 9.5 mm regardless of their size.



To prevent long originals (A3, B4, A4-R, LD, LG, COMP, or 8K) from sliding out, raise the paper exit stopper.
When you have finished using the stopper, lift it slightly and slide it back in.



To prevent misfeeding, do not leave originals or turn OFF/ON the equipment with originals on the Reversing
Automatic Document Feeder.

Press [COPY].

Summary of Contents for e-studio2007









































































































































































Search results

Summary of Contents for e-studio2007

Reviews:

Brands by name

Popular brands

Toshiba e-studio2007, User Manual

Search results

Summary of Contents for e-studio2007

Reviews:

Brands by name

Popular brands