Toshiba e-studio2007 User Manual Download

Page: 111 / 170

4 SCAN FUNCTIONS

Scan to USB Memory 109

Scan to USB Memory

Scan to USB allows you to save scanned images as PDF, TIFF, or JPEG files in a USB storage device.



Procedure for Scan to USB Memory

USB storage devices must meet requirements below. However, some USB storage devices may not be used with this
equipment even though the requirements below are met.
-

FAT16 or FAT32 format

Single-partition (USB storage devices with multiple partitions are not supported.)

Place the original(s).



For placing the originals, see the pages below.



P.35 “Copying originals”



A4, A3, A5-R, B5, B5-R, B4, A4-R and FOLIO (LT, LD, LT-R, LG, ST-R and COMP) sized originals can be
scanned.

Press [SCAN].

To store scans in a USB storage device, connect the device to the equipment and wait a
few seconds.

Scan to USB

USB Media

Summary of Contents for e-studio2007









































































































































































Search results

Summary of Contents for e-studio2007

Reviews:

Related manuals for e-studio2007

Brands by name

Popular brands

Toshiba e-studio2007, User Manual

Search results

Summary of Contents for e-studio2007

Reviews:

Related manuals for e-studio2007

Brands by name

Popular brands