Toshiba e-studio15, Operator'S Manual

Page: 6 / 78

1-2 INSTALLATION
Choosing a Location
All electrical equipment is potentially dangerous if not installed and operated correctly.
Make sure that you meet the following requirements when you set up or move the unit.
• The unit must be installed on a level
surface.
• Use only the rated voltage from a
properly grounded wall socket.
• Keep the unit away from areas that are:
- Dusty or smoky
- Damp or humid
- Poorly ventilated
- In front of windows or extremely
bright light
- In direct sunlight
- Subject to other extreme conditions
• Provide ample room for easy access to
the front, back, and sides of the unit.
• Leave enough space around the
ventilation outlets for heat from the fan
to dissipate properly. Blocking these
outlets could cause the unit to
overheat, which can cause serious
damage to the internal parts.
• Use of extension cords is not
recommended.
Fan
This manual describes how to use the fax function of the unit.
Part names and functions shared with the copy function (for example, the misfeed
indicator and add paper indicator), are described in the copier operator’s manual.
For more information, please read the copier operator’s manual.
Introduction