Toshiba e-studio15, Operator'S Manual

Page: 57 / 78

HOW TO USE THE FAX FUNCTION 4-19
Polling allows you to request another fax machine to send a document to your fax
machine. In other words, the receiving fax machine, not the transmitting fax machine,
activates the transmission. You can use your fax to both poll and be polled by others.
Setting the Polling Key
To use the polling function, you must first set Rapid key 20/POLL for use as a polling
key. This is done by following the procedure shown below.
• The polling key cannot be used for both Rapid Key Dialling and Polling. If it has
already been programmed for Rapid Key Dialling, you must clear it first as described
in “Storing Numbers for Automatic Dialling” in Chapter 2.
Step Press these keys Comments
1
“ENTRY MODE” will appear in the
display.
2
“POLLING FUNCTION” will appear in
the display.
3
Press “1” to turn the polling function
on, or “2” to turn it off.
4
Press the STOP key twice to exit.
Polling Others
1
Dial the number of the fax machine
you want to poll using one of the
following methods:
• Press the SPEAKER key, and then
press a Rapid key. Wait for the fax
answer-back tone.
• Press the SPEAKER key and dial
the full number. Wait for the fax
answer-back tone.
• Press the SPEED/SEARCH key and
enter a 2-digit Speed Dial number.
• Enter the full number using the
number keys.
2
Press Rapid key 20/POLL.
Polling
FUNCTION
DEF
ABC
STOP
(example)
20/POLL
or
STOP
GHI
SPEED/SEARCH
Special Functions