Toshiba e-studio15 Operator'S Manual Download Page 50

Page: 50 / 78

HOW TO USE THE FAX FUNCTION

4-12

You can choose whether or not to have a footer with the sending machine’s ID
information (name, number, etc.) printed out.

Factory setting: 2 (OFF)

Step

Press these keys

Comments

“OPTION SETTING” will appear in
the display.

“FOOTER PRINT” will appear in the
display.

Press 1 to print footers, or 2 to not
print them.

Press the STOP key twice to exit.

Footer Printing

FUNCTION

GHI

ABC

STOP

Optional Reception Settings

You need to use the SPEAKER key or an extension telephone to perform manual
sending and receiving. For information about connecting an extension telephone see
“Connecting Other Devices” in Chapter 1 for details.

When the extension telephone
rings, pick up the handset and
converse.
• If the SPEAKER key is used to

answer a call you cannot converse.

Note: You cannot use the SPEAKER key for fax transmission/reception while copying

is in progress.

When the handset is off hook or the
SPEAKER key is used, press the
FAX START key.
• When there are originals in the ADF,

the machine senses the presence of
the originals and displays the
message.
Press “1” to send. Press “2” to
receive.

MANUAL MODE
1:SEND 2:RECEIVE

When using manual sending and receiving

Summary of Contents for e-studio15















































































Search results

Summary of Contents for e-studio15

Reviews:

Related manuals for e-studio15

Brands by name

Popular brands

Toshiba e-studio15, Operator'S Manual

Search results

Summary of Contents for e-studio15

Reviews:

Related manuals for e-studio15

Brands by name

Popular brands